Details
Details
- A real breakthrough in professional amplifier technology: Synq introduces a new range of CLASS-D AMPLIFIERS with exceptional power and competitive pricing!
- The extremely high efficiency, reduced power waste and very low heat dissipation are the main advantages of these PWM-amplifiers!
- Incredible space savings for mobile applications: enclosure only 1unit high!
- Incredible low weight: 3,3kg!
- Extremely high power output:
- 2x 540Wrms @ 4ohms
- 2x 300Wrms @ 8ohms
- Output in bridge mode:
- 1x 1080Wrms @ 8ohms
- All the protections you can think of for professional use:
- Signal + current limiters
- Overload protection
- Short circuit current protection
- DC protection
- Thermal protection
- AC, VHF protection
- Soft start
- …
- Very powerful bass response, also perfect for subwoofers!
- Switchable 30Hz low cut filter eliminates unwanted, power consuming, subsonic frequencies.
- 3 different working modes: stereo, bridge mode, mono mode (inputs linked)
- Balanced in/outputs on XLR
- 2 Speakon connectors (left and right outputs)
- 1 separate output for bridge mode
Technical Specifications
Technical Specifications
| General : Dimensions (cm) | 48.2 x 4.4 x 21.5 cm |
|---|---|
| General : Weight (kg) | 3 |
| General : Color | black |
| General : Powerinput | AC 240V, 50Hz |
| General : Energy Label | No |
| General : Power consumption W | 1200 |
| General : Display | none |
| General : Fixation | 19" rack mountable |
| General : RU | 1U |
| General : IP rating | indoor |
| Control : Protocol | N/A |
| Audio : min. frequency (Hz) | 5 |
| Audio : max. frequency (Hz) | 36000 |
| Audio : damping factor (>...) | 280 |
| Audio : max. output channels | 2 |
| Audio : Wrms 4Ω stereo, per channel | 540 |
| Audio : Wrms 8Ω stereo, per channel | 300 |
| Audio : Wrms 8Ω bridge | 1080 |
| Audio : functions | bridge mode, limiter |
| Connections : input | 3 pin XLR, Schuko CEE 7/7 |
| Connections : output | 3 pin XLR, speakon |
| Brand | SYNQ |
| EANCode | 5420025602686 |
Manual & Downloads
Manual & Downloads
 DIGIT 1K0, 2K2, 3K6 Manual v3.0 Size: (1.86 MB) |
DIGIT 1K0, 2K2, 3K6 Manual v3.0 |
| DIGIT 1K0 EC declaration Size: (569.38 KB) |
DIGIT 1K0 EC declaration of conformity |
| DIGIT_1K0 PDF leaflet Deutsch Size: (1.25 MB) |
PDF_LEAFLET_DIGIT_1K0_B00268_de.pdf |
| DIGIT_1K0 PDF leaflet English Size: (1.25 MB) |
PDF_LEAFLET_DIGIT_1K0_B00268_en.pdf |
| DIGIT_1K0 PDF leaflet Français Size: (1.25 MB) |
PDF_LEAFLET_DIGIT_1K0_B00268_fr.pdf |
| DIGIT_1K0 PDF leaflet Nederlands Size: (1.25 MB) |
PDF_LEAFLET_DIGIT_1K0_B00268_nl.pdf |
Reviews & References
Customer Reviews (1)
- Using Digit 1K0 as a bass guitar power amplifier.Review by Jazzyvee
-
I bought this amplifier in the summer of 2018 as part of a 3U lightweight rig with a valve pre-amp and power supply I was building for convenience on smaller gigs. So far I have used it on about 8 gigs on a variety of genres from reggae, jazz and funk, blues, classic rock and 70's pop and also at most of my rehearsal sessions.
I use barefaced cabs which are FRFR have used it with a 4 ohm cab and bridge mode using an 8 ohm cab. Each time the amplifier has performed superbly and most important to me the sound is clean and crisp across the whole spectrum of my bass and regardless of the volume I needed to perform at. It seems to have a lot of clean headroom which is great when I need more low end volume for reggae and punch for slap bass playing. (Posted on 1/3/2019)
